Subtotal: $0.00 Cart
  • the source of our inspiration

    premium, archival fine art inkjet papers wrapped in the intimacy of a rural culture

  • juniper baryta rag

    our best reviewed and most award-winning paper yet


    Photo: Andy Biggs

    "All my portfolios are printed on Entrada. It's necessary that each print stands alone as a piece of art, and it's because of Entrada's weight and feel that my portfolio stands out from the rest."


Moab Support Forum > Mounting Slickrock

Is there a way to mount your Slickrock Metallic paper so that it lies perfectly flat in a frame (i.e., like dry-mounting)?

January 12, 2018 | Unregistered CommenterJoan

We have a couple recommendations for framing, not sure what you’ve tried so far.

First, after letting the print off-gas, or when it arrives at the framers, We’d recommend back-rolling the paper to remove any residual curl from the roll.

For framing, is there a reason your frame shop is not taping the entire width of the print, top and bottom, to a backing board before matting? This should eliminate any rippling along the edges.

Also, the print could be vacuum-mounted to a backing board before matting. We’ve worked with a couple frame shops that use a vacuum press to adhere the print with adhesive to the backing board, which gives you a flat, fully attached print. The print can’t be removed from the backing board, but we assume these are for display & sale so you wouldn’t be disassembling them at a later time.

January 12, 2018 | Unregistered CommenterMoab Paper